Harbor terrain lighting

The challenge: High masts that are far apart.

Yourlight also provides LED lighting for masts higher than 50 meters that illuminate the harbor area at the right light intensity and with the correct uniformity. By applying the optimal combination of the correct lens configuration and the correct strength of the luminaire, each harbor terrain can be illuminated in accordance with modern lighting requirements and standards and requirements in the fact of ​​sustainability.

1000W SON-T or HPI-T luminaires can easily be replaced one-to-one with a 600W LED luminaire, which can also be dynamically controlled via dali, pwm or 0-10V. Traditional 1000W luminaires are equipped with conventional control gear, which often consumes about 20% of the power consumption of the light source when aging. In that case, the savings with modern LED lighting will increase to more than 50%.

If the luminaires are dimmed at the moment that no activities take place on the terrain, but for example for safety and monitoring on for example 10%, then the saving is even greater.

Maintenance is a crime on masts of 30m +. The fixtures from Yourlight are maintenance-free. If something unexpectedly breaks a LED fixture, then that is almost always the driver. This is very easy to replace. In addition, most luminaires for modular masts are modular, they are equipped with 2 or even 3 drivers so that at all times 2/3 or half of the light remains if a driver should fail. This can be replaced at the moment that the maintenance service suits the best, without the safety being directly at stake.

Our lighting designers are highly skilled and experienced engineers who have the expertise to design a lighting plan for the most complicated (container) terminals with modern computer programs.

Below you can see an example with some renderings and the photo of the final result of a lighting plan for the new fully automatic container terminal of APM-T at Lazaro Cardenas in Mexico.